Skip to main content

Filtration

 

Ceramic Filtration Layers with adjustable Pore Size 

 

The treatment of water with ceramic filters (e.g. for service water filtration or for pre-filtration of deep groundwater) is becoming increasingly important. Ceramic systems offer great advantages such as high temperature and chemical resistance, good flux values, good cleanability and backwashability, combined with a very long service life and mechanical resistance.

For such ceramic filter systems, CeraNovis offers suitable separation layers with adjustable pore sizes. They can be used on both tubular and flat filter systems and can be operated in both negative pressure and overpressure processes. Likewise, dead-end or cross-flow filtration is possible with these layers.

Ceranovis' filter Systems are based on  Al2O3, ZrO2, on TiO2 or on mixtures of different particle sizes and the respective oxides. 

Name Pore size* Material Separation layer Intermediate layer
CN1 300-350nm Al2O3/ZrO2 Yes No
CN1S 250-300nm Al2O3/ZrO2 Yes No
CN2 60-80nm Al2O3/ZrO2 Yes Dep. on Substrate
CN3 80-120nm Al2O3/ZrO2 Yes Dep. on Substrate
CN4 40-60nm Al2O3 Yes Dep. on Substrate
CN5 20-30nm Al2O3 Yes Dep. on Substrate
CN6 5-10nm ZrO2 oder TiO2 Yes Dep. on Substrate
CN7 700-1000nm Al2O3/ZrO2 Yes No

 

*: indicative values only; Hg-porosimetry; sizes may vary with different methods/instruments

 

 

These products may be of interest for :

  • Manufacturers of ceramic filters and filter systems based on ceramic filters in (waste) water treatment 

For enquiries and further pore sizes please contact us diferectly at post@ceranovis.com